Clickfree™ Portable Backup Drive Quickstart Guide
To Backup a Windows® Computer
Mac OSX Leopard 10.5 or later
1.Ensure that your computer is on and you are
logged in.
1. Ensure that your computer is on and you are
logged in.
2. Connect the Clickfree Backup to your
computer’s USB port using the USB cable that is
included.
2. Connect the Clickfree Backup to your
computer’s USB port using the USB cable that is
included.
3. Wait for approximately 60 seconds. The
Clickfree backup program will automatically start.
If the Clickfree backup program does not appear
on your computer screen, please see the
Troubleshooting section.
3. Wait for approximately 60 seconds. This
window appears only once when you first connect
your Clickfree device. Double-Click on this window
to start the Clickfree backup program.
This window will also appear only once when you
first connect your Clickfree device.
4.Your backup will start and run automatically.
5. When backup is complete, just unplug the
Clickfree Backup from your computer.
Congratulations! Your files are now safe.
a) Select “Make my device work on Mac”. You will
only need to do this once.
4. Your backup will start and run automatically.
Note for Windows® Vista Users:
Some Windows Vista users will see the following
screens on their computer. If this screen appears
1 of 2
25/02/2009 4:21 PM
|
GE 28031 User Manual
Fisher Paykel Cooktop CG604D User Manual
Epson A882441 User Manual
Elo TouchSystems Elo Entuitive 3000 Series 1525L User Manual
Dell 66M2N User Manual
Cypress NoBL CY7C1475V25 User Manual
Atlantis Land A05 17AM D01, A05 17BM D03, A05 19BM D02 User Manual
Asus Computer Monitor MS248 User Manual
Asus A8N E User Manual
AG Neovo Neovo E 19 User Manual